S&S Cycle SS560-0425 130 Tooth x 1-1/2" Wide Final Drive Belt for Softail Late 94-99 w/65 Tooth Pulley/Dyna 94-96 w/65 Tooth Rear Pulley

* Also Fits Softail 1986-1999 with 1-1/2in. x 65 Tooth Rear Pulley.

* Also Fits Dyna 1991-1999 with 1-1/2in. x 65 Tooth Rear Pulley.

* Super strong Gates Poly x Carbon X3N material.

* Robust carbon tensile cord combines minimal stretch with extraordinary strength and load carrying capacity

* Significantly stronger than the Aramid material OEM final belts.

* Proudly Made in the USA by Gates & S&S Cycle !

Suggested Additional Purchase:

Primary Gasket Kit # CG-C9885 or JGI-60539-94-K

Tech Tips:-

* Count the Teeth on your Belt before Ordering!

* Avoid Improper Handling - Twisting, Pinching, Kinking or Prying.

* Avoid Improper Belt Alignment, toe in or toe out, chamber tilt left or tilt right, vehicle alignment early model FXR’s, FXD’s, FLT’s.

* Avoid Improper belt tension: too tight, too loose.

* Avoid Worn out pulleys not replaced at time of belt replacement.

* Avoid Oil leaks that cause oil to penetrate belt, chemical reaction to Belts.

* Avoid Shocks that cause improper belt tension due to raising or lowering.

* Avoid Broken Shocks or Shock Studs.

* Avoid Failure to properly readjust new belt as it seats into pulleys at 800 and 1600 klms, and at regular services.

* Avoid Road debris, rocks, metal, glass, tire tread or re-tread pieces, etc.

* Avoid Failure to properly readjust belt on bikes overloaded for long trips.

* Avoid Chemicals used to clean motorcycle - chemical reaction to Belts.

* Avoid Racing, burnouts, wheel stands, all affect tension & alignment.

* Avoid Worn or broken pulley isolator rubber/s.

* Avoid Reverse Over Bending of Belt.

* Avoid Belt that Rubs or has Contact with the Belt Passage Way.