Belt Drive Limited BDL-30853ST 132T x 1 1/2" Wide Primary Drive Belt

Rear Drive Belts – Limited Warranty Due to the possibility of existing pulley wear, misalignment or improper tension, there is no warranty on belts and no returns after installation. Please inspect the belt thoroughly prior to installation and report any issues to us. Drive belt sprocket alignment must be spot on If the pulley is misaligned it causes distortion of the belt and uneven distribution of the load, resulting in premature belt failure. Misalignment will affect belt tracking, resulting in severe belt edge wear, sprocket flange wear and noise problems. Customisers who fit their own belts, be warned! Instead of taking a punt on whether or not to use a particular after-market belt, ask us to specify the correct belt. The rear axle must be aligned correctly If the axle is out of alignment it will tilt the wheel pulley, resulting in all sorts of issues. Be compulsive about aligning your axle. Worn belt = worn sprocket Just like a chain-driven bike, if you wear the belt, you’ve probably worn the pulley. Replace it at the same time; otherwise you’ll shorten the life of your brand new belt! Belt tension Read your manual and know the correct tension for your particular bike’s belt. Belt tension should be done when the belt bike is cold and adjustment should be made with the weight of a rider on the bike.